News - May 15, 2007

Sapcon’s Capacitance Level switch…SLC Level limit detection of fine, coarse, bulk solids, liquids and non sticky slurries, conductive or non-conductive, corrosive or non-series corrosive in nature.

Sapcon's Capacitance Level switch…SLC Level limit detection of fine, coarse, bulk solids, liquids and non sticky slurries, conductive or non-conductive, corrosive or non-series corrosive in nature. It's used for switching conveyors off to avoid overflow and for indicating an empty tank well in time to avoid production stoppage. It's also used for protecting pumps from running dry thereby reducing wear and tear. SLC series of level switches is successfully used in process industries viz. cement, power, steel, food, chemicals, fertilizer, sugar, detergent etc.

It doesn't have any moving parts and there is no mechanical wear and tear. It has interference-free signal transmission from electronic insert to evaluation unit, and system fault indication for added reliability. Calibration is possible from Remote Location. Evaluation unit can be installed far away from the probe. Calibration control is available in the evaluation unit. Fail-Safe High/Low selection feature is available as standard. This reduces inventory, since the same evaluation unit can be field configured either for High or Low level fail-safe detection. SLC ignores build up of material on vessel walls, this is done using an extended ground technique to create inactive region. The instrument uses ordinary 3 core cable for interconnecting the electronic insert with the evaluation unit. A variety of built in multi-point evaluation units is available to reduce the number of discrete controllers thereby reducing the overall cost.

Sapcon Instruments Pvt. Ltd.
131, Palshikar Colony, INDORE: 452 004 (India)
(+91-731) 4085751, 4082751, 2475751 - 52 - 53
Fax: (+91-731) 2475475;
Website: www.sapconinstruments.com